tllg440., tllr440., tlly440. www.vishay.com vishay semiconductors rev. 1.7, 20-feb-12 1 document number: 83029 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 low current led in ? 3 mm tinted diffused package product group and package data ? product group: led ?package: 3 mm ? product series: low current ? angle of half intensity: 25 features ? low power consumption ? high brightness ? cmos/mos compatible ? specified at i f = 2 ma ? luminous intensity categorized ? yellow and green color categorized ? compliant to rohs directive 2011/65/eu and in accordance to weee 2002/96/ec note ** please see document vishay material category policy: www.vishay.com/doc?99902 applications ? low power dc circuits 19220 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. tllr4400 red 0.63 1.2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4400-as12z red 0.63 1.2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4400-bt12z red 0.63 1.2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4400-ms12z red 0.63 1.2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4401 red 1 2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4401-as12 red 1 2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4401-as12z red 1 2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4401-bt12 red 1 2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4401-bt21z red 1 2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4401-ms21z red 1 2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tllr4401-ms21 red 1 2 - 2 612 - 625 - 1.9 2.4 2 gaasp on gap tlly4400 yellow 0.63 1.2 - 2 581 - 594 - 2.4 2.9 2 gaasp on gap tlly4400-as12 yellow 0.63 1.2 - 2 581 - 594 - 2.4 2.9 2 gaasp on gap tlly4400-bt12z yellow 0.63 1.2 - 2 581 - 594 - 2.4 2.9 2 gaasp on gap tlly4400-ms12 yellow 0.63 1.2 - 2 581 - 594 - 2.4 2.9 2 gaasp on gap tlly4401 yellow 1 2 - 2 581 - 594 - 2.4 2.9 2 gaasp on gap tlly4401-as12 yellow 1 2 - 2 581 - 594 - 2.4 2.9 2 gaasp on gap tlly4401-as12z yellow 1 2 - 2 581 - 594 - 2.4 2.9 2 gaasp on gap tlly4401-ms12 yellow 1 2 - 2 581 - 594 - 2.4 2.9 2 gaasp on gap tllg4400 green 0.63 1.2 - 2 562 - 575 - 1.9 2.4 2 gap on gap tllg4400-as12 green 0.63 1.2 - 2 562 - 575 - 1.9 2.4 2 gap on gap tllg4401 green 1 2 - 2 562 - 575 - 1.9 2.4 2 gap on gap tllg4401-as12 green 1 2 - 2 562 - 575 - 1.9 2.4 2 gap on gap tllg4401-as12z green 1 2 - 2 562 - 575 - 1.9 2.4 2 gap on gap TLLG4401-BT12 green 1 2 - 2 562 - 575 - 1.9 2.4 2 gap on gap tllg4401-bt21z green 1 2 - 2 562 - 575 - 1.9 2.4 2 gap on gap
tllg440., tllr440., tlly440. www.vishay.com vishay semiconductors rev. 1.7, 20-feb-12 2 document number: 83029 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmin. /i vmax. 0.5 note (1) in one packing unit i vmin. /i vmax. 0.5 absolute maximum ratings (t amb = 25 c, unless otherwise specified) tllg440., tllr440., tlly440. parameter test condition symbol value unit reverse voltage v r 6v dc forward current i f 7ma surge forward current t p 10 s i fsm 0.15 a power dissipation t amb 84 c p v 20 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 55 to + 100 c soldering temperature t 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 800 k/w optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tllr440., red parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 2 ma tllr4400 i v 0.63 1.2 - mcd tllr4401 i v 12-mcd dominant wavelength i f = 2 ma d 612 - 625 nm peak wavelength i f = 2 ma p -635- nm angle of half intensity i f = 2 ma ? - 25- deg forward voltage i f = 2 ma v f -1.92.4v reverse voltage i r = 10 a v r 620- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlly440., yellow parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 2 ma tlly4400 i v 0.63 1.2 - mcd tlly4401 i v 12-mcd dominant wavelength i f = 2 ma d 581 - 594 nm peak wavelength i f = 2 ma p -585- nm angle of half intensity i f = 2 ma ? - 25- deg forward voltage i f = 2 ma v f -2.42.9v reverse voltage i r = 10 a v r 620- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf
tllg440., tllr440., tlly440. www.vishay.com vishay semiconductors rev. 1.7, 20-feb-12 3 document number: 83029 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmin. /i vmax. 0.5 note ? luminous intensity is tested at a current pulse duration of 25 ms. the above type numbers represent the order groups which include only a few brightness groups. only one group will be shipped on each bag (there will be no mixing of two groups on each bag). in order to ensure availability, single brightness groups will not be orderable. in a similar manner for colors where wavelength groups are measured and binned, si ngle wavelength grou ps will be shipped on any one bag. in order to ensure availability, single wavelength groups will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tllg440., green parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 10 ma tllg4400 i v 0.63 1.2 - mcd tllg4401 i v 12-mcd dominant wavelength i f = 10 ma d 562 - 575 nm peak wavelength i f = 10 ma p -565- nm angle of half intensity i f = 10 ma ? - 25- deg forward voltage i f = 20 ma v f -1.92.4v reverse voltage i r = 10 a v r 620- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf luminous intensity classification group light intensity (mcd) standard min. max. k0.63 1.25 l1 2 m1.6 3.2 n2.5 5 p4 8 q 6.3 12.5 r10 20 s16 32 t25 50 u40 80 color classification group dom. wavelength (nm) yellow green min. max. min. max. 0---- 1 581 584 - - 2 583 586 - - 3 585 588 562 565 4 587 590 564 567 5 589 592 566 569 6 591 594 568 571 7 - - 570 573 8 - - 572 575
tllg440., tllr440., tlly440. www.vishay.com vishay semiconductors rev. 1.7, 20-feb-12 4 document number: 83029 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative luminous in tensity vs. angular displacement fig. 3 - forward current vs. forward voltage fig. 4 - relative luminous in tensity vs. ambient temperature fig. 5 - relative luminous inte nsity vs. forward current/duty cycle fig. 6 - relative luminous intensity vs. forward current 0 2 4 6 8 10 i f - forward current (ma) t amb - ambient temperature (c) 95 10049 0 20406080100 0.4 0.2 0 0.2 0.4 0.6 95 10060 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity 0.1 1 10 100 v f - forward voltage (v) 95 10050 i f - forward current (ma) red t p /t = 0.001 t p = 10 s 5 4 3 2 0 1 0 95 10051 20 40 60 80 100 i v rel - relative luminous intensity i f = 2 ma 0 0.4 0.8 1.2 1.6 2.0 t amb - ambient temperature (c) red 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 96 11490 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i v rel - relative luminous intensity 2.0 red 0.01 0.1 1 10 100 95 10061 i f - forward current (ma) i v rel - relative luminous intensity 100 10 1 0.1 red
tllg440., tllr440., tlly440. www.vishay.com vishay semiconductors rev. 1.7, 20-feb-12 5 document number: 83029 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - relative intensity vs. wavelength fig. 8 - forward current vs. forward voltage fig. 9 - relative luminous in tensity vs. ambient temperature fig. 10 - relative luminous intensity vs. forward current/duty cycle fig. 11 - relative luminous intensity vs. forward current fig. 12 - relative in tensity vs. wavelength 590 610 630 650 670 0 0.2 0.4 0.6 0.8 1.2 690 95 10040 - wavelength (nm) 1.0 red i v rel - relative luminous intensity 01 0.1 1 10 100 v f - forward voltage (v) 5 95 10053 i f - forward current (ma) yellow t p /t = 0.001 t p = 10 s 23 4 0 0.4 0.8 1.2 1.6 2.0 i v rel - relative luminous intensity yellow t amb - ambient temperature (c) 95 10054 0 2040 6080100 yellow 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 96 11590 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i v rel - relative luminous intensity 2.0 yellow 0.01 0.1 1 10 100 95 10062 i f - forward current (ma) i v rel - relative luminous intensity 100 10 1 0.1 550 570 590 610 630 0 0.2 0.4 0.6 0.8 1.2 650 95 10039 - wavelength (nm) 1.0 yellow i rel - relative intensity
tllg440., tllr440., tlly440. www.vishay.com vishay semiconductors rev. 1.7, 20-feb-12 6 document number: 83029 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - forward current vs. forward voltage fig. 14 - relative luminous in tensity vs. ambient temperature fig. 15 - relative luminous intensity vs. forward current/duty cycle fig. 16 - relative luminous intensity vs. forward current fig. 17 - relative in tensity vs. wavelength 02 0.1 1 10 100 4 i f - forward current (ma) green t p /t = 0.001 t p = 10 s 13 5 0 0 0.4 0.8 1.2 1.6 95 10057 20 40 60 80 100 i v rel - relative luminous intensity t amb - ambient temperature (c) green i f = 2 ma 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 96 11591 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i v rel - relative luminous intensity 2.0 green 0.1 1 10 0.01 0.1 1 10 100 100 95 10059 i v rel - relative luminous intensity i f - forward current (ma) green 520 540 560 580 600 0 0.2 0.4 0.6 0.8 1.2 620 95 10038 - wavelength (nm) 1.0 green i rel - relative intensity
tllg440., tllr440., tlly440. www.vishay.com vishay semiconductors rev. 1.7, 20-feb-12 7 document number: 83029 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters reel dimensions in millimeters fig. 18 - reel as12 = cathode leaves tape first as21 = anode leaves tape first tape fig. 19 - led in tape ? 3.2 0.15 ? 2.9 0.15 0.4 + 0.15 - 0.05 < 0.6 3.5 0.1 4.5 0.3 5.8 0.3 30.3 0.5 1.5 0.25 0.6 0.15 2.54 nom. drawing-no.: 6.544-5255.01-4 issue: 7; 25.09.08 95 10913 specifications according to din technical drawings a c area not plane (2.5) r 1.4 (sphere) identification label: 355 90 30 48 45 52 max. 948641 vishay/type/group/tape code/production code/quantity paper adhesive tape identification label reel tape diodes: anode before cathode phototransistors: emitter before collector code 21 diodes: cathode before anode phototransistors: collector before emitter code 12 94 8671
tllg440., tllr440., tlly440. www.vishay.com vishay semiconductors rev. 1.7, 20-feb-12 8 document number: 83029 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ammopack fig. 20 - tape direction note ? the new nomenclature for ammopack is asz only, without suffix for the led orientation. the cart on box has to be turned to the desired position: + for anode first, or - for cathode first. as12z and as21z are still valid for already existing types, but not fo r new design. tape dimensions in millimeters option dimension h 0.5 mm dimension x 0.5 mm as 17.3 - ms 25.5 - bt 20.0 16.0 tape feed direction diodes: cathode before anode transistors: collector before emitter label tape feed direction 94 8667-2 diodes: anode before cathode transistors: emitter before collecto r 21885 quantity per: 2000 reel (mat.-no. 1764) 0.9 max. ? 4 0.2 6.35 0.7 12.7 0.2 5.08 0.7 12.7 1 2 1 0.3 0.2 12 0.3 9 0.5 18 + 1 - 0.5 2.54 + 1.6 - 0.1 measure limit over 20 index-holes: 1 ?h? ?x? 5.08 + 0.6 - 0.1 3.81 0.7
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
